Avery Dennison

FIRST PLACE Collotype Labels, Mile End South, South Australia Graham Beck Brut Blanc de Blancs Press: Komori, Tahara, Roland, Heidelberg Cylinders: Kodak Dies: Rulecut, Triforme Substrate: CPI Ink/Coating/Adhesive: Flint Group SECOND PLACE Collotype Labels, Mile End South, South Australia Ondine Press: Gallus Plates/Screens/Cylinders: Winner, Gallus Dies: Kocher + Beck Substrate: Avery Dennison Ink: Flint Group THIRD PLACE Collotype Labels, Mile End South, South Australia Delicato Family Vineyards Press: Nilpeter Plates: Fuji Dies: Kocher + Beck Substrate: Avery Dennison Ink/Coating/Adhesive: UV Sicpa

By definition, “standards” is “fulfilling specific requirements as established by an authority, law, rule, custom, etc.; a guiding principle.” However, I can state without equivocation that sometimes the pursuit of standards can literally go to the dogs. When discussing this matter with TAGSYS’ Chief Technology Officer, Alastair McArthur, he instantly recalled his experience with his children’s pet bulldog, Oscar. It seems Oscar has had an encounter of the closest kind with RFID. As an unsuspecting pup, the French bulldog was injected with an RFID tag. The use of RFID for the identification of companion animals, referred to as micro-chipping, is a very mature

Combining in-line processes provides the key to distinctive products. COMBINING A VARIETY of processes in package-printing applications is being seen more and more often. This does not mean that it's becoming routine—by any sense of the imagination—just more popular. Commenting on last year's TLMI Awards Competition, Ray Mackura, technical marketing manager for Avery Dennison, Fasson Roll North America and a judge in the competition, said, "The use of combination printing is becoming quite common, and printers are getting really good at it." The reason why combination printing is not routine (and hopefully, will never reach such a stagnant milestone) is that it provides a

With competition from alternate decorating methods on the rise, paper holds its own in the label market. THERE'S GOT TO be more certainties out there than death and taxes, life is just too short. In the context of package printing, one thing for certain is that converters are continually being asked to print and deliver labels with quicker and quicker turnarounds. Knowing this as a constant in the formula of faster = better, printers are in a never-ending search for materials, equipment, and processes that will enhance their capabilities. For materials, statistics show that it's not always what's new that is better, as

With energy costs soaring, CPCs may be looking for additional ways to attract consumers' diminished spending power. AS IF BUSINESS wasn't tough enough already, the drastic rise in oil prices over the last several months will test the fabric of people and companies throughout every stage of the supply chain. The pain will be felt everywhere, starting at the end of the supply chain—the consumer—who supports the flow of money throughout the long, complicated supply-chain trail. The typical consumer is going to have noticeably less hard cash left in his or her pocket after putting gas in the car and staying warm

The 3rd Annual Phoenix Challenge Foundation fundraising luncheon will be held Sept. 30 at the Wyndham Garden Hotel in Charlotte, NC, from 11:00 a.m. ; 2:00 p.m. The agenda will highlight the past success of the program as well as announce current and future enhancements for the upcoming competition. The distinguished keynote speaker is Brad Steven, vice president of marketing for Fasson/Avery Dennison. As a proud sponsor of The Phoenix Challenge, Foundation of Flexographic Technical Association (FFTA) is asking FTA members to show their support of this extremely worthwhile program by attending the luncheon. FTA member support will ensure the learning, growth and success

SHANGHAI—Labelexpo Asia 2005, taking place at the Shanghai New International Expo Centre on 7-9 December 2005, is set to be over twice the size of the last event in 2003.  All the leading international suppliers who were at the last show will be there again, such as Avery Dennison, Esko-Graphics, Gallus, HP Indigo, Kocher + Beck, Labelmen, Mark Andy, Nilpeter, Omet, Purlux, Rotoflex, Rotometrics, Raflatac, Shanghai Auclean, and Yupo - plus there will be many new exhibitors such as H-Shine Printing Machine Company and Orthotec Wan Am (Concorde Precision Technology). Package and label printing in China accounts for some 48% of the country's total

Want a way to make a product's label look great? One answer is to make it look like there's no label. THE CLEAR, NO-LABEL-LOOK label is a rage with consumer products companies (CPCs). These companies are driven by the need to differentiate their products and to make them look fresh and unique. And right now, one means to create that unique shelf appeal is coming from clear film labels. "The no-label-look is a way that marketers and end-users [CPCs] can create differentiation to gain market share," says Terce Henriquez, vice president of global label sales for AET Films. Meeting market needs The no-label look

Recipe for Success - Growth is Key

Growth is key to any converter's success, and Weber Marking Systems is flourishing. TAKE ONE CONVERTER, add in Mark Andy presses and accessories from such companies as AAA Press International and RotoMetrics and stir. Sprinkle in a variety of label substrates and inks, and allow to grow. Following such a recipe has proven to be a successful mix for Weber Marking Systems, headquartered in Arlington Heights, Ill. Weber Marking Systems, established in 1932 by Joseph Weber Sr., began with the production of stencils, addressing machines, and hand printers for print-and-apply labeling. But today, it has grown into a multi-faceted label and coding company serving